iFi iPurifier 3.0

Picture of betula

betula

Headphoneus Supremus

Pros: Additional clarity and transparency, it really does what it says. Easy to use plug&play.

Cons: Level of performance is system dependent and it is a bit pricey.

After writing reviews about four different iFi amps and DACs, the company offered me to try any of their products if I am interested and write my honest opinion about them. I was interested in the iPurifier 3.0 so here we go.

iFi is not supporting me in any way, this is my independent and subjective opinion on the product after testing it for a couple of weeks.
IMG_20181027_154433672.jpg
I have been using AudioQuest Jitterbug for a long time as to my ears it improves the sound significantly enough for the price of £39. To my ears in my system the Jitterbug adds a certain level of clarity to the overall picture especially at the lower notes.

My system at this point is a Dell laptop, Chord 2Qute and Questyle CMA 600i amp. I am using a QED (High Performance digital interconnect) USB cable, nothing fancy just a basic decent cable. Similarly my interconnect cables between the 2Qute and CMA600i are basic QED cables worth around £30.

Since the 2Qute is a pretty good DAC with galvanic isolation I wasn’t expecting too much improvement from the iPurifier 3.0. To be honest I believed for £129 it would be a bit of a disappointment, especially versus my Jitterbug which cost less than third of that.
IMG_20181027_154409825.jpg
iFi’s iPurifier obviously does much more than the Jitterbug. It reclocks and regenerates the signal and there is built-in active noise cancelling. It is a much more complex and advanced audio accessory.
Still, at the end of the day it is ‘just’ a USB device you plug into your DAC.
I am not going to describe all the technical details as iFi explains it much better on their website. I am simply writing from the average user’s point of view about audible or inaudible improvements.

I wanted to find out whether I can hear any sonic improvements that can justify the £129 price tag.
I had many listening sessions with the Jitterbug and the iPurifier 3.0 plugged into the CMA600i’s DAC or straight into my 2Qute using the 600i as an amp only.
IMG_20181027_154519317.jpg
I will reflect on all these combinations: 600i with Jitterbug, 600i with iPurifier, 600i with both devices; 2Qute with Jitterbug, 2Qute with iPurifier and 2Qute with both USB units.

Before I start to talk about the sound I have to mention that the weight and the build quality of the iPurifier 3 was surprisingly good, beyond my expectations. It is quite heavy for the size (not uncomfortably heavy) made of good quality metal. The feeling of quality is light-years ahead of the cheap plastic built memory stick feeling from the 90’s: the way the Jitterbug comes across.
IMG_20181027_154335554.jpg
The most obvious improvement to my ears was audible with the 600i’s built in DAC and the iPurifier 3. Using the 600i’s DAC with the Jitterbug in comparison offers a more superficial clarity. The iPurifier 3 digs deeper. This device conveys more depth and clarity without a question. You can look deeper in the stage and see what is happening in the background more clearly. As a consequence of this extra depth you can also identify more micro details.
IMG_20181027_154418091.jpg
I thought using the Jitterbug will be pointless if the iPurifier is offering better clarity overall but I was wrong. Using the two devices together has further improved the sound. While the transparency the Jitterbug brings to the picture is superficial compared to the iPurifier 3’s much deeper sense of clarity, the two devices together sound even clearer. The Jitterbug is just a little bit warm. Hearing this slight extra warmth is actually quite satisfying in the bass frequencies. AudioQuest’s device gives clarity and a bit of weight to the bass notes, while the iPurifier 3 seems to concentrate on higher frequencies a bit more. It cleans out the mids and treble much deeper than the Jitterbug but somehow bass sounds a little bit thinner in comparison.
IMG_20181027_154348089.jpg
Hands down the iPurifier 3 is the more professional device that gives you more of everything (clarity, precision, transparency). However using the two USB signal cleaners together was quite a pleasant surprise and resulted in an even more satisfying sound than using only one of them.

Both devices have advantages. If you don’t want to spend £129, the Jitterbug for £39 is a good and recommended alternative. The iPurifier 3 offers much better clarity and more neutrality, but also costs significantly more.
IMG_20181027_154454250.jpg
The level of improvement they bring to the picture is highly system dependent. In my opinion the improvement is bigger with lower quality gear. I wish I had some real entry level gear around to test this. In my experience the improvement the iPurifier 3 brought was more obvious with my 600i’s DAC than it was with the 2Qute, although the sound improved even when I plugged iFi’s device in the Chord DAC.
IMG_20181027_154504070.jpg
The 2Qute as a DAC compared to the built in DAC in the 600i is much superior. It is a big step up in definition, separation, imaging, presence and clarity/transparency.
Adding the iPurifier 3.0 to my home set up (PC – Jitterbug – 2Qute – CMA600i amp) still brought out some extra and undeniable clarity: improved the sense of soundstage depth. Beside this enhanced clarity and more easily audible micro details, tightness and timing has also improved.

Ifi with the iPurifier 3 offers raw, neutral and deep clarity while the Jitterbug cleans only the surface and also adds a hint of warmth. With this warmth the Jitterbug offers slightly more weight to the bass but can’t match iFi’s deep cleaning abilities.
I did want to choose only one of them, but had to discover they best work together, at least with my system.
IMG_20181027_154359664.jpg
Whether we need these USB signal cleaning devices is highly system and ear dependent. It depends on the quality of your audio chain and on your ears too; how refined and experienced your hearing is.
Using my system I have hopefully given you an idea by now, what level of improvement you might be able to get. We are not talking about a 40-50% improvement, but to my ears the improvement in overall clarity is at least 10-20% depending on what set up I was using.

If you use the Jitterbug and the iPurifier 3 at the same time it almost sounds like you have upgraded your DAC. For £168 that is not bad.
I would love to see the iPurifier’s price going under £100, and then it would be a no brainer. Still I will be missing it a lot.
IMG_20181103_172201889 (1).jpg
If you want to improve your system but you are not quite ready for another DAC or amp purchase or you just simply want to bring out the most of your current system, you might want to look into USB signal purifiers. They bring unexpected levels of clarity to the overall picture which you are more likely to appreciate than ignore. The iFi iPurifier 3.0 is a surprisingly great little device that more of us should try and consider implementing in our audio chain.

EDIT: Instead of sending back the iPurifier 3.0 I asked iFi whether they are willing to sell it to me with some discount since it was a review unit. They offered 25% off, so I ended up buying it.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Oldest
Newest Most Voted
0
Would love your thoughts, please comment.x
()
x